What Are The Production Rules For Fluorine Rubber O-rings

Fluoro rubber O-ring iron shell skeleton oil seal Car valve oil seal British oil seal, high-speed rotation oil seal, car oil seal, floating oil seal, hub oil seal, J-type frameless oil seal, air compressor oil seal, giving the fluoro rubber O-ring its own initial sealing ability, working pressure, higher than 70Mpa; Power transportation speed: relatively large 15m/s; Operating temperature: - 30~120 ℃ (nitrile rubber fluorine rubber O-ring), - 30~200 ℃ (fluorine rubber fluorine rubber O-ring, sealing ring.

Never hit hard or punch hard to prevent the oil seal from deforming or breaking the tension spring and causing it to fail; If it is necessary to remove and install the seal from the beginning due to lip flanging, tension spring falling, and oil seal tilting, the outer surface of the seal ring should be coated with appropriate smoothing agent to smooth the equipment inside the cavity. When pressing the seal ring into the equipment orientation, use an average speed and pressure, and properly maintain the pressure to prevent rebound.

Other oxidants have good safety and stability effects, and are resistant to chemical corrosion and other sealing materials, such as fluororubber rings, fluororubber tubes, fluororubber strips, or other fluororubber parts and industrial products. Oil resistance is better among oil resistant rubbers, with good radiation resistance and high vacuum resistance; Electrical insulation, mechanical properties, chemical corrosion resistance, ozone resistance, and atmospheric aging resistance are all excellent. The defects are poor processability, expensive price, poor cold resistance, and low elasticity and permeability.